Fluke Networks MS2-100 Network Cable Tester

Rp 17.000.000 *Include PPN

2 produk terjual dalam 5 jam terakhir

Terjual cepat! Lebih dari 4 orang memiliki di keranjang mereka

Fluke Networks MS2-100 sangat cocok digunakan oleh teknisi jaringan untuk instalasi, pemeliharaan, maupun perbaikan kabel, karena mampu mempercepat proses kerja sekaligus meningkatkan akurasi dalam pengujian jaringan.

10 orang sedang melihat ini sekarang

Garansi Resmi: Produk dijamin 100% Original & Bergaransi
Dukungan Teknis: Tim ahli siap membantu kalibrasi & purna jual

Guaranteed Safe And Secure Checkout

Deskripsi
Ulasan(0)

Fluke Networks MS2-100 Network Cable Tester adalah alat penguji kabel jaringan yang digunakan untuk memverifikasi, menganalisis, dan melakukan troubleshooting pada instalasi kabel komunikasi seperti LAN, telepon, dan coaxial. alat ini termasuk dalam kategori cable verifier yang dirancang untuk memberikan hasil pengujian yang cepat dan akurat dalam satu tampilan.

Fluke Networks MS2-100 mampu menampilkan beberapa parameter penting secara bersamaan, seperti wiremap (susunan kabel), panjang kabel, identifikasi kabel, serta jarak ke titik kerusakan. semua informasi tersebut ditampilkan dalam satu layar LCD, sehingga memudahkan teknisi dalam menganalisis kondisi kabel tanpa perlu berpindah mode pengujian.

FITUR Fluke MS2-100

SPESIFIKASI Fluke MS2-100

Environmental specifications
Operating temperature	32 °F to 113 °F (0 °C to 45 °C)
Storage temperature	-4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation)	90 % (50 °F to 95 °F 10 °C to 35 °C) 75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and Vibration	Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop test with and without wiremap adapter attached
Safety	IEC 61010-1 3rd Edition
Altitude	4,000 m; Storage: 12,000 m
EMC	IEC 61326-1

General specifications
Test connectors	Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner²: F-connector for coaxial cable.
Power	Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours of typical use Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached)	3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner²: 10.6 oz (300 g)
Display	Monochrome LCD with backlight

Test modes
Cable test	Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone	Generates Intellitone™ and normal analog toning signals
PoE	MicroScanner²: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices

Performance specifications
Cable types tested	Twisted pair: UTP, FTP, SSTP Coaxial (MicroScanner²): 75 Ω, 50 Ω, 93 Ω
Length test	Range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error. Calibration: User-settable NVP for twisted pair and coax (MicroScanner²). Can determine actual NVP with known length of cable.
Wiremap test	Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection	MicroScanner²: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.
Tone generator	Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.